Catalogs
How to Replace Husqvarna Riding Lawnmower U1 Battery?
In this short video, YouTube Bogger @randall928 shows you how to replace the battery in your Husqvarna riding lawnmower. It doesn't matter if yours lawn mower isn't a Husqvarna, this installation tutorial also applies to Craftsman Toro John Deere and more riding batteries as well. Thanks to this blogger for the well shot video.
After you watch the video, I’ll break down the tools and steps you’ll need to replace a riding lawn mower battery — step by step next!
Tools You Need When you Install Riding Lawnmower U1 Battery
- A wrench or socket set.
- A battery; the type of the battery may depend on the model of your petrol-powered ride-on lawn mower. Please check your operator's manual for the correct battery type. And find the right lawn mower battery for yourself.
Be Careful: Before working with the battery, make sure that you remove any jewelry from your hands, as well as watches.
Husqvarna Lawn Mower Battery Installation with U1 360CCA AGM Riding Lawn Mower Battery
Replacing your Husqvarna lawn mower battery is straightforward when you follow these simple steps:
Step 1: Park and Power Down
- Park your mower on a flat, level surface.
- Turn off the ignition and remove the key.
- Engage the parking brake for safety.
Step 2: Locate the Battery
- Open the hood or battery compartment cover.
- On most Husqvarna riding mowers, the battery is located under the seat or beneath the hood.
Step 3: Disconnect and Remove the Old Battery
- Always remove the negative (black) cable first, then the positive (red) cable.
- Use your wrench or socket to loosen the terminal nuts.
- Carefully lift the old battery out using a strap or handle if available.
Step 4: Clean the Battery Tray and Terminals
- Use a terminal cleaner or wire brush to clean off any corrosion from the tray and cables.
- Ensure the area is dry and free of debris.
Step 5: Install the New U1 360CCA AGM Battery
- Place the new battery into the tray, ensuring it sits firmly and securely. Please note a point of detail here, the Uplus U1 battery can be hand-carried so that you can easily and conveniently install the battery. This is the result of R&D adjustments made by uplus in response to user habits.
- Connect the positive (red) cable first, followed by the negative (black) cable.
- Tighten the terminal nuts securely without over-tightening.
Step 6: Apply Anti-Corrosion Spray (Optional)
- Lightly spray the terminals to help prevent corrosion and extend battery life.
Step 7: Close Up and Test
- Close the battery compartment or hood.
- Turn the ignition key to ensure the mower starts up smoothly.
And you’re done! With your new U1 riding lawnmower AGM battery installed, your Husqvarna riding mower is ready to get back to work, delivering reliable, powerful starts every time.
The above is the installation steps of Husqvarna riding battery, if you still want to know more battery DIY tutorials or maintenance tutorials, please pay attention to “UPLUS BATTERY”.
FAQs
- Are there any other lawn mower batteries besides the U1 360CCA riding mower battery?
Yes, there are available in different sizes and CCA. Like: Uplus U1 250CCA riding lawnmower battery, U1 320CCA riding lawnmower battery etc.
About Uplus
Uplus Battery, the subsidiary of Leoch battery and a renowned international brand. Specializing in high-performance, maintenance-free AGM batteries. With more than 20 years of R&D experience and a global distribution network, Uplus provides reliable AGM power solutions for vehicles of all types—from cars and trucks to powersports (motorcycles/ATV/UTV), boats, and industrial applications.
Uplus battery AGM (Absorbent Glass Mat) batteries are known for their excellent start-stop performance, vibration resistance, and long service life. Unlike traditional flooded lead-acid batteries, Uplus AGM batteries are completely sealed, spill-proof, and require no maintenance.
